12

2022

-

07

How to produce corrugated cardboard

Author:


Tile line is the abbreviation of corrugated cardboard production line, mainly composed of two parts: cadre equipment and wet end equipment. During production, the rolled base paper is first placed on a shaftless support and gradually unwinded under tension control. The paper web is fed into the corrugated machine through a preheating cylinder, and the corrugated is formed by a single sided corrugated machine. It is then bonded to the inner paper through corn starch adhesive or cassava powder adhesive to form two layers of corrugated cardboard. Secondly, the two layers of cardboard are laminated with A-shaped cardboard and B-shaped cardboard through a glue machine, and then dried into shape by a drying machine. They are then cut in length and width according to customer requirements through a vertical and horizontal cutting machine. So how to produce corrugated cardboard? Below, the editor will provide you with a detailed introduction!
Firstly, place the five rolls of raw paper in a certain direction on the paper return rack, and preheat each web through a preheater to heat its surface for better adhesion. The corrugated base paper is preheated by a preprocessor before being fed into the single sided machine, adjusting the water content of the paper and ironing the paper width.
Subsequently, the corrugated base paper enters the single-sided machine for pressing, applying adhesive, and bonding with the surface paper to form a single-sided corrugated cardboard. After being made of single-sided corrugated cardboard, it is lifted and transported to the overhead conveyor frame by conveyor, and then enters the triple preheater through the brake. Next, two types of single-sided corrugated cardboard are fed into the gluing machine for gluing, and the inner paper is preheated again. Then, the three are combined into the drying equipment of the double-sided unit for bonding and drying. The cardboard is thermally bonded and then cooled to allow the moisture content to evaporate. After the cardboard is cooled on the conveyor belt, it is cut horizontally by a computer cross cutting knife according to a certain specification, and finally transported to the stacker through the conveyor belt and stacked neatly.
Manufacturing corrugated cardboard is a very complex and involves a lot of knowledge. There are many factors to consider in the manufacturing process. During production, corrugated base paper, temperature, adhesive, speed, etc. are required to be synchronized. If one link loses control, quality issues will inevitably occur. If the adhesive ratio is not appropriate, insufficient temperature of the corrugated roller, pressure roller, and heat roller can cause blistering, peeling, or poor adhesion of the corrugated cardboard.

Related News