18
2022
-
08
Analysis of the Corrosion Resistance of Adhesive Label Printing by Label Paper Manufacturers
Author:
The adhesive label printing also needs to have the characteristics of corrosion resistance, anti-aging, non fading, small folding and swelling ratio. If the corrosion resistance is poor, prone to aging and fading, the label made is not durable and can also affect the sales and use of the product. If the proportion of folding and expansion is relatively large, it not only affects the printing precision after printing, but also causes deformation of the label during use, affecting product sales and usage. Especially for good product labels, efforts should be made to avoid the awkward situation where the product has not expired and the label has aged (label aging includes factors such as plastic aging and ink fading). If it is necessary to carry out anti-aging test for plastics or signs, check their performance indicators.
Four key points for the appearance quality of raw materials for self-adhesive labels
1. Check if there are burrs on the adhesive material, and ensure that the edges of the drum adhesive material are smooth and undamaged, ensuring the basic printing quality of the adhesive label.
2. When dividing self-adhesive materials, improper adjustment of the cutting tool or insufficient sharpness of the blade can cause cracks to appear at the end of the white cotton paper or paper in the self-adhesive material. Crack detection and pulling out chemical fibers are undoubtedly a type of adhesive rod. Cracks can be continuous or random, and there may be adhesive material on one side or both sides of the drum. Therefore, in previous printing equipment, adhesive raw materials were carefully examined to see if there was a small gap between glossy paper and white cotton paper. Afterwards, take a test paper and separate it from the paper and glossy paper below after the paper inspection to see if there are any gaps. Because the gaps are sometimes very small, only the bottom paper can be separated and the tissue can be found. It is worth noting that ink and adhesive need to slowly accumulate during the printing process until they reach the guide rollers of the printing machine, which can also cause cracks on the edges of the adhesive material. Therefore, even if it starts printing now, the aforementioned issues cannot be ignored.
3. Is the edge of the adhesive material adhesive? The backing plastic sheet is coated with water permeable siloxane, and a portion of methyl silicone oil leaks in the area where the adhesive material adheres to the edge or bottom paper, which may cause the bright surface paper of the exhaust pipe to break during the printing process and prevent normal production and manufacturing. Therefore, printing bears about 1 meter of raw material adhesion, while on the other hand, it detaches from the edges or other positions for a long time. Generally, the drilling volume of the adhesive raw materials that occur in the bottom edge of the organization and printing paper adhesion is only 7-10 meters away from the surface layer. Therefore, when encountering adhesion at the edge of the segmented drum adhesive material, do not immediately assume that the entire bundle of paper has this problem.
4. Check whether the dividing ports of the drum adhesive material are vertical and whether the rewinding tightness is consistent. If the dividing ports of the drum adhesive material are uneven, it will not only affect the registration after printing, but also cause difficulties in waste disposal due to changes in the film cutting area; Inconsistent tightness during rewinding often leads to changes in paper form force during printing, and uneven support can also lead to quality issues in printed products.
Related News
Analysis of the Corrosion Resistance of Adhesive Label Printing by Label Paper Manufacturers
2022-08-18
What is the difference between digital printing and traditional printing
2022-08-18
What is the difference between UV printing and screen printing
2022-08-18
Printing Label Factory Teaches You the Difference between First Stamping and Later Stamping in Printing Adhesive Labels
2022-08-17
Follow Us
Mobile
Customer Service
Address: No. 18 Chunfeng Road, Economic and Technological Development Zone, Yuanzhou District, Yichun City, Jiangxi Province
Telephone: 86-795-3292788
E-Mail: jxkenshin@163.com
This website already supports IPV4/IPV6 bidirectional access